Saturday, November 24, 2018

Re: [MW:28677] wps mechanical testing for pipe

Hi,
Refer table QW451.1 for Range and type & no of tests required. refer figures in QW 462 for sizes for tension and bend tests. Normally 300mm length and circumferentially 300mm (if one piece is not enough, then you have to use multiple specimens).

Inline image


Thanks& Regards,

 

(Karthik)

Karthikeyan.S

QA/QC Manager
Agon Pacific Co.,Ltd.
M: +66-655-174-397, +66-892-512-282

E-mail : karthik6684@yahoo.com



On Saturday, November 24, 2018, 11:33:19 AM GMT+7, Er Sourav Bohray <ermechsouravbohray@gmail.com> wrote:


can anyone tell me from were to decide no of mechanical test for pipe groove for wps asme sec 9 ? test coupon size and no of test ? its urgent

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...