Monday, November 19, 2018

[MW:28654] Impact requirement of multiple process and different Group number

Dear All, 


PQR conducted on P1G1#p1G3 with wall thickness 7.8 mm. Root Hot Pass with GTAW and Remaining SMAW. 


1) Is this required to carry out impact test of HAZ for both G1 and G3 material ?

2) Is it required to carry out impact test for both GTAW and SMAW process separately ??


With Regards

Riaz  

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35725] Dismillar material Welding

Dear experts,  In my Hydro Electric Project  materials using A517Gr.F and A537CL-II.  For A517Gr.F using E 11018M and A537CL-II using E 9018...