Dear,
It is fillet weld for sure. ...
Regards,
Mohammed ghani.
On 29 Feb 2016 06:18, "Jayachandran" <chandranv84@gmail.com> wrote:
-- Hello Sir,I hope it is Butt weld T-Joint, so you can apply normal UT also.RegardsJayachandran V.--On Sun, Feb 28, 2016 at 1:01 PM, Mohammed Ghani <ghani386@gmail.com> wrote:Dear experts,
I want to locate Fillet weld cracks below 6 mm for 22 mm plate with double V preparation.
Is there any special techniques from NDT I can use to identify cracks below 6 mm.Please suggest me if any suitable NDT procedure for this. It is a bit urgent.
Appreciate your respond.
Regards,
--
Mohammed ghani.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAG7AWVhBp4jWOun%3DrCPmJuh%2B1PLib%3D9%2BFM4KWDSsuRAUVRSVsg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANvSE6m_tZVX3%2B5-u-jbGYDg0D%2BHmeuTQpJUARQ3qzrMVf_cZg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
This message is eligible for Automatic Cleanup! (You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAG7AWVjeWavS6mrZVTGQ3bdQ2%2BdtNGGHeJ6nPHz8Q%3DCKRi0%2BjQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment