Re: [MW:24289] Sub size Impact test value

Dear naz,
Refer API 650 section 9 paragraph 9.2.2.5.
Thanks,
Regards,
G.S.Perumal.


On 2/11/16, naz01913@gmail.com <naz01913@gmail.com> wrote:
>
>
>
> Sir,
>
> Can anyone explain to me is this impact value correct or not for MDMT -8.5
> Deg C. Materials is P No-1 Group No-2. Applicable code API-650 Edition
> 2013.
>
> <https://lh3.googleusercontent.com/-H3E6XxXMvzQ/VryMZ6nq_TI/AAAAAAAAAAQ/mmcjnune8Oo/s1600/12.jpg>
>
>
>
>
>
> Regards
> Naz
>
> --
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> To post to this group, send email to materials-welding@googlegroups.com.
> Visit this group at https://groups.google.com/group/materials-welding.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/materials-welding/7b403a36-28c6-4bd5-a8a6-c03c01f3a9e0%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPFTRWnhbyDKyhmwxnsmXTQOC150Psm9Di3nqhAKyYtURUhEcg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.