Re: [MW:24325] acceptance criteria for undercut

Please refer table 342.x ..I am not recalling exactly. ..as per the service class requirement of the product.  And those are open to surface you can file them or remove them.

On 19 Feb 2016 07:47, "Kannayeram Gnanapandithan" <kgpandithan@gmail.com> wrote:

1mm

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

On Thu, Feb 18, 2016 at 7:36 PM, Martin Prad <martin_prad@hotmail.com> wrote:

Hi experts in welding inspection

Is attached highlighted undercut acceptable assuming the depth in pipe edge is max 0.5 mm

pipe is welded to slip on flange from front side so it is internal weld from flange face side

construction code is ASME B31.3

Can you refer to code sections?

regards

Martin.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/DB3PR08MB0137D7542A79A8F815E2B7CE9AAF0%40DB3PR08MB0137.eurprd08.prod.outlook.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eM2%3D-8Wpscir9UVXR0i0z_ESKbsnwz0Tm%2BXnkq4T97hNA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAF7Kwvm5LC0Y8OwECqXe4E_S%2B41HcoaOpnUNVuseA8PYHdw92A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.