As per my view cold weld compound can not be used as substitue to weld built up. It is just used as cismetic work to facilitate coating or lining.
On Feb 21, 2016 5:51 AM, "Mohamed Elsahhar" <mohamed.elsahhar2000@gmail.com> wrote:
-- dear members ,
i asked if repair codes or standers of pressure equipment allow to
repair metal loss in pressurized equipment with cold weld (BELZONA) if
allow it please give me your reference depending to ASME /API codes or
STD ,thanks for your time
Best Regards
QC/QA eng.
m.elsahhar
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADGm7%3DzidsuSrdh%3DXmzuLgnZZNpRwWvQQVgao5s6_drgadCTgg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMa8CQrBGPiLohpnr%2Bkcjs83zbPKKDpz-n5rKrhteu25JEv-eQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment