Dear all,
PIPING Mat is cs and 35mm WPS is qualifed with dull furness pwht.welding process SMAW AND GTAW.code is ASMEix and 31.3.
To improve productivity and avoid full furness PWHT for only repair joints
WHAT EXTRA THINGS OR NDE OR PRECAUTION SHOULD TAKE FOR LOCAL REAPIR PWHT OR 360 BAND PWHT?
Is it allowed normally or you will have to have WPS.?
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/4459d65b-4b0e-4955-ac40-88024ed3919b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Post Comments (Atom)
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment