Sunday, February 21, 2016

[MW:24337] universal welding gauge calibration


hi ,

our client want to calibrate universal welding gauge  and we have gauge  but not be calibration. is it required for calibration if yes then which code we have to follow and where that mention?

your prompt reply that highly appreciate. 

Regards.
harmish mewada 
QC Engineer 

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/cae708b5-b0a4-4d6e-af9b-4b100c8e24e6%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...