if 625 meets your service requirements, so will ERNiCrMo-3
What I mean is that this filler metal matches the properties of 625 quite well...
So if 625 is fit for this service, ERNiCrMo-3 could be acceptable too...
Ramin Kondori
Sr. QA/QC & Welding Engineer
-----------------------------------------------------------
PG-Dip. in Welding Engineering (IWE AT 0070)
BSc. in Civil Engineering (IUT)
BGAS Painting Inspector
ASNT Level I&II
On Sun, Feb 21, 2016 at 4:38 PM, manish kulkarni <kul_manish@yahoo.co.in> wrote:
But there are limitations for temp. In spur service for this consumable.
--On Sun, 21 Feb, 2016 at 4:13 pm, Ramin Kondori<raminkondori@gmail.com> wrote:To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEagfUgmUSDpLFWg86XT2N-hFBpmBk4LJNJHdi-NH0cSCT6Xrg%40mail.gmail.com.ER NiCrMo-3 will do the gob--Ramin KondoriSr. QA/QC & Welding Engineer-----------------------------------------------------------PG-Dip. in Welding Engineering (IWE AT 0070)BSc. in Civil Engineering (IUT)BGAS Painting InspectorASNT Level I&IIOn Sun, Feb 21, 2016 at 2:18 PM, manish kulkarni <kul_manish@yahoo.co.in> wrote:
Any suggestions for consumable slection for SS 310S to cast Inconnel 625 material for sour service and max temp. exposure 650 Deg.C??
Any corrosion tests for such joints?
Regards,
Manish kulkarni
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1890907287.6111280.1456051715106.JavaMail.yahoo%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1981026294.6150239.1456060085581.JavaMail.yahoo%40mail.yahoo.com.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEagfUi31%3DGhuLoS7jgMDs2NgAzuuZotRq4Svh8JvUUFh6S12Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment