Dear Experts,
In Circumferential seam welding of P9B material, wire ENi3, we are observing some.drops on surface as attached in photo, not spatter, not.pock marks flux used is UV 418TT. Baked at 350 deg. C FOR 2 hrs.
Pls give your suggestions to avoid problem.
Thanks for your.valuable comments!
Best Regards,
Mohit Aggarwal.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment