The minimum tensile strength requirement of X65 is 77ksi, so ER80S-Ni1 can be an option.
As per section 6.5 of SAES-W-012 (July 2013 Ed) the min. strength requirement for X65 for root is 70XX while fill passes is 80XX. This applies only to manual/semi-automatic processes but does not applies to automatic GMAW .
Does anybody have an idea why this criteria is not applicable to automatic GMAW?
Thanks & Regards,
On Tue, Apr 15, 2014 at 6:05 PM, Babur Khan <mbabur.bwp@gmail.com> wrote:
--Dear All,Kindly suggest filler wire (single wire for root/fill/cap) for API 5L- X65 for fully automatic GMAW process by keeping in view the additional requirements of Saudi Aramco standard (SAES-W-012).Regards,Regards
BABUR KHAN LASHARI
Welding Inspector
Mob: +966 (0) 56 2179280
+92334 6186285
Skype Id : babur.lashari
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment