Re: [MW:20692] ASME SEC IX QW202.1

Thanks for the info,

Please note that QW202.1 also allows for retesting ( after considering all ifs & buts in the code/ QW153) from the same test coupon. Now my question is, if one tensile specimen fails, how many additional test specimens shall be tested.

 

On Monday, April 28, 2014 2:41:28 PM UTC+3, sina wrote:

Dear friend,

If any specimen fails to meet the requirements, the test coupon consider to be failed and a new test coupon shall prepare. (It could be with the same parameters or changed parameters)

Regards

On Mon, Apr 28, 2014 at 10:46 AM, STR <tulas...@gmail.com> wrote:

Friends,

Good Morning,

With reference to ASME Sec IX:

1. If one tensile specimen failed the requirement of QW153

2. How many additional specimens are to be tested QW202.1

Regards,
Tulasi Ram

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
M. Shokri Arfaei

ISA-ISTS - Metallurgy Lab. Manager

ASNT NDT Level III

International Welding Engineer

Tel.: +98 21 66282127

Fax: +98 21 66282779

Mob.:+98 912 1394023

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.