Thursday, April 17, 2014

[MW:20607] API 650 - Impact acceptance criteria for A516 Gr.60

A tank will be built from ASTM A516 Gr. 60. and under the rules of API 650/2013.
The design temperature is 0 ºF.
The welding of horizontal shell joints will be done by SAW.
There is impact requirement for weld metal, according to 9.2.2.4 + 4.2.10.3.

The point is that ASTM A516 is included in QW-422 and according to 9.2.1.3, it is not possible consider this material as P1. Therefore, I believe it is not possible to use the values described in 9.2.2.5.

If so, where are the minimum values for impact test?

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone