[MW:20694] RF of ASME B16.5 Flanges

Dear Experts,

We have fabricated one vessel as per ASME Section VIII Div. 2 Edition 2010, Add. 2011. The vessel is internally cladded with Alloy 625 for corrosion resistance purpose. Cladding thickness is not considered in the design. The flanges were ordered as flat face and corrosion resistance overlay was applied, and machined to RF required dimensions as per ASME B 16.5. Reference to the attached interpretation, when the RF was made with different material (corrosion resistance cladding), does these flanges are categorized as non standard flanges?? Please give your opinion on the same.

Regards,

Josnit

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.