Thursday, January 31, 2013

Re: [MW:16658] ASTM A514 TYPE T-1

Hi Hany.
Is only first pass or root pass, and E7018. Other pass too you can used E7010 rooT pass and E7018 others pass
Enviado desde mi BlackBerry de Movistar

From: hany alfy <hanyon_alfy@yahoo.com>
Sender: materials-welding@googlegroups.com
Date: Wed, 30 Jan 2013 20:32:16 -0800 (PST)
To: materials-welding@googlegroups.com<materials-welding@googlegroups.com>
ReplyTo: materials-welding@googlegroups.com
Subject: Re: [MW:16653] ASTM A514 TYPE T-1

6010 is not for permanent  works also is not low hydrogen how we can use it?

This steel grade have 690 MPa YS so how we can use these electrodes ?

Regards,
Hani Alfe


From: "agumarca@yahoo.com" <agumarca@yahoo.com>
To: materials welding <materials-welding@googlegroups.com>
Sent: Wednesday, January 30, 2013 3:26 PM
Subject: Re: [MW:16644] ASTM A514 TYPE T-1

Hi.
You can use E6010 first pass and other pass E7018
Enviado desde mi BlackBerry de Movistar

From: hany alfy <hanyon_alfy@yahoo.com>
Sender: materials-welding@googlegroups.com
Date: Tue, 29 Jan 2013 23:36:39 -0800 (PST)
To: materials-welding@googlegroups.com<materials-welding@googlegroups.com>
ReplyTo: materials-welding@googlegroups.com
Subject: [MW:16635] ASTM A514 TYPE T-1



Dear All

We need to fabricate one mechanical Grab plates are grade ASTM A514 TYPE T-1
Which electrode we can use for welding

Regards,
H.A
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 


No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...