Generally common life cycle for carbon steel pipe without anode bed is
around 10 years but we have take proper treatment to used anode bed to
increase upto 40 years
So used cathodic protection in proper preservation with steel covering
to increase the life of carbon steel structure
On 1/20/13, Ali Asghari <asghariali@rocketmail.com> wrote:
> Dear All
> Does anybody have exprience for applying a anti corrosive layer( such as
> paint or coat) for a carbon steel structure that ae in contact with sea
> water?
>
> or any body have solution for increasing of life time of these items?
> Regards.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
>
>
--
Aslab A Khan
Samsung Engineering Co. Ltd.,
QA/QC Engineer,
OPaL HDPE UNIT, Dahej.
Gujarat, India
Mob. No. +91-9824292898
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
[MW:35346] Cast-iron welding
Any advice for cast iron welding Sent from Yahoo Mail for iPhone
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment