Controlling factor for PWHT temp is CS and not SS and we have heat treat as per ASME code UCS 56 or any applicable code
Regards
Hegde Prakash
----- Original Message -----
From: sevak hiren <hirensevak80@gmail.com>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Cc:
Sent: Thursday, 24 January 2013 12:04 PM
Subject: [MW:16587] PWHT Temperature for welding CS To SS
Dear Experts,
Kindly suggest what should be the PWHT Temperature after welding of
following dissimilar materials.
SA 516 Gr.70 To SA 240 Gr.304
Regards
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
From: sevak hiren <hirensevak80@gmail.com>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Cc:
Sent: Thursday, 24 January 2013 12:04 PM
Subject: [MW:16587] PWHT Temperature for welding CS To SS
Dear Experts,
Kindly suggest what should be the PWHT Temperature after welding of
following dissimilar materials.
SA 516 Gr.70 To SA 240 Gr.304
Regards
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment