Re: [MW:16554] Heat Exchanger Tube cleaning

Dear sir,
The cleaning is  depending up on quantity  of the tube tube to be cleaned  and degree of cleanness as per  application requirement.
In normal application compressed air leak test  with or without ball you can choose.
I accuracy of cleaning is more required then you can choose lube oil flushing.
Water flushing is not advisable it lead to start on corrosion inside the tube after completion of the flushing.

On Thu, Jan 17, 2013 at 12:05 PM, MOHAMMED ILYAS MOHIUDDIN <ilyasmohi@gmail.com> wrote:

Dear Venkat,

 

It depends of what degree of cleaning and deposit you expect, mostly it is high water jet cleaning and if tubes have hard scales then chemical cleaning is recommended. Contact Tubetech from UK experts for chemical cleaning and Dacon Inspection Services for Tube inspections.

 

Regards

MIM

On Wed, Jan 16, 2013 at 2:25 PM, Venkatesan Velayudam <velvenkat2002@gmail.com> wrote:

Dear Expert,

Anybody know Heat Exchanger Tube cleaning process. 

And what is the chemical shall we use.

Kindly inform

Thanks

Venkatesan

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

--
Thanking You
With Best Regards
Mohammed Ilyas Mohiuddin

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.