Re: [MW:16631] hardex welding procedure

You can qualify procedure as per ASME Section IX for hard facing overlay qualification. 

Sent from my iPhone

On Jan 27, 2013, at 17:38, hany alfy <hanyon_alfy@yahoo.com> wrote:

You will never find WPS for Hard facing 

You have to check the Hardness then you can apply the manufacturer recommendation

Send me the information maybe i have some pre works similar

Regards,

H.A

---

From: "rmsengineering@gmail.com" <rmsengineering@gmail.com>
To: materials-welding@googlegroups.com
Sent: Sunday, January 27, 2013 9:19 AM
Subject: [MW:16606] hardex welding procedure

Dear all 

We have been asked to qualify our welders and prepaire WPS and PQR as per HARDEX WELDING PROCEDURE for harfacing 

what is this procedure exactly and how to prepare the same 

what are all the qualifying criterion 

--
Regards
S.B. Badami
RMS Engineering

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.