Re: [MW:16371] Final welding appearance

It is not very clear from the images whether the two plates/ specimens are of same thickness or different. If the thicknesses are different method II is correct.

regardes

nspandit

On Sat, Dec 29, 2012 at 1:29 PM, welding <samirmehta.jnd@gmail.com> wrote:

Dear all,

kindly go through the attached file and advice which one is correct and acceptable method as per the welding standard also provide reference documents. 

regards

samir

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

--
N. S. Pandit
alternative e-mail panditns1@rediffmail.com

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.