Pl do not make any confusion with Construction and Reference code requirements
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
QW 407 is only for weldments heat treated condition not base metal
Pandithan
Welding Consultant
-- On Thu, Dec 20, 2012 at 10:57 AM, Raghuram Bathula <raghurambathula@gmail.com> wrote:
Base material heat treatment condition is requested for ASME pressure vessels, refer UG-84(h)(2) , when impact testing is requiredthe test plate material shall satisfy all of the following requirements relative to the material to be used in production:(a) be of the same P-Number and Group Number;(b) be in the same heat treated condition
On Monday, December 17, 2012 2:56:09 PM UTC+5:30, vins wrote:--Dear ExpertsI need some clarification from base metal heat treated condition (NR+SR to NR) or (SR +NR) is there in WPS, Why this required and where it's written applicable essential variableIn pipe existing pipe was SR condition and the new one N condition, hear also this case applicable are not
Please Give me some code reference for review….
--ThanksWith Best Regards,D.VINCER MICHAEL
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments