Re: [MW:16274] Re: Material heat treated condition

PQR shall be conducated on the Base material of the same Heat treated condition as per ASME Sec.VIII UG-84 when impact testing is applicable.

 

Thanks & Regards

J.Gerald Jayakumar

From: Raghuram Bathula <raghurambathula@gmail.com>
To: materials-welding@googlegroups.com
Sent: Thursday, December 20, 2012 1:27 PM
Subject: [MW:16273] Re: Material heat treated condition

Base material heat treatment condition is requested for ASME pressure vessels, refer  UG-84(h)(2) , when impact testing is required

 the test plate material shall satisfy all of the following requirements relative to the material to be used in production:

(a) be of the same P-Number and Group Number;

(b) be in the same heat treated condition

On Monday, December 17, 2012 2:56:09 PM UTC+5:30, vins wrote:

Dear Experts

I need some clarification from base metal heat treated condition (NR+SR to NR) or (SR +NR) is there in WPS, Why this required and where it's written applicable essential variable

In pipe existing pipe was SR condition and the new one N condition, hear also this case applicable are not

Please Give me some code reference for review….

--

Thanks

With Best Regards,

D.VINCER MICHAEL

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.