Skip to main content

[MW:3367] ISNT -Preconference Workshop on Digital Radiography

 


From: V, Manoharan (GE, Research) [mailto:Manoharan.V@ge.com]
Sent: Tuesday, September 29, 2009 3:40 PM
To: undisclosed-recipients
Subject: FW: ISNT -Preconference Workshop on Digital Radiography

 

 

      Dear Sir,

 

•         We invite you to participate in two day Preconference Workshop on Digital Radiography. Please see enclosed brochure.The workshop will have speakers from •Federal Institute of Materials Research and Testing,BAM, Berlin, Germany, Indira Gandhi Center for Atomic Research, Kalpakkam,

•         •GE Global Research Center , Bangalore , Indian Space Research Organization,Thiruvanandhapuram and Fraunhofer Institute, Germany  

 

     The workshop is scheduled to be held on:

Date: 8-9, December, 2009

Venue:National Institute of Technology, Trichirapalli, Tamilnadu

 

To register please get in touch with manoharan.v@ge.com

 

Look forward to having you at the workshop.  

 

Regards,

Conveners, Preconference Workshop on Digital Radiography

 

 



--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Comments

Popular posts from this blog

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...

[MW:36169] Cold Bending Qualification

Dear Experts,  Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L.  Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .

[MW:30043] Weep hole

If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .