If is not mandatory (hardness value), you need to specify while ordering as per the contract requirement (for e.g. if any corrosive service, like NACE), Pl. refer attached Dillinger catalogue, hardness <=22HRC can be met, but hardness is not measured on the product.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Hamed
Sent: Monday, September 21, 2009 9:28 AM
To: materials-welding@googlegroups.com
Subject: [MW:3263] RE: 3260] Re: [MW:/] FW: Hardness value of european material
Thanks for your help senthilkumar. But there is not any information regarding hardness in this reference also.
REGARDS
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of SENTHILKUMAR SWAMINATHAN
Sent: Sunday, September 20, 2009 1:49 PM
To: materials-welding@googlegroups.com
Subject: [MW:3260] Re: [MW:/] FW: Hardness value of european material
| Hamed, Check this will give you some details.
Dear all Can anyone inform me when we want to find a European steel where we should refer? For example I want to find the harness value for P275NL2 & P355NL2 . But in the material standard (EN10028-3) not mentioned any things in this regards. Also If anybody know about any equation between harness & any other mechanical properties of steels. REGARDS Sincerely yours Hamed Malekan See the Web's breaking stories, chosen by people like you. Check out Yahoo! Buzz |
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment