Tuesday, September 29, 2009

[MW:3354] Re: Heat Input

Adi,
Heat input is a guideline for subsequent welding. The yardstick is the average  value as obtained from your PQR. Your production welding should not exceed PQR HI values.
By the way, is 6010, 7018-1 Ok for LTCS?  What is the working temp?
Shashank Vagal

--- On Tue, 29/9/09, Adi <adinraos@gmail.com> wrote:

From: Adi <adinraos@gmail.com>
Subject: [MW:3352] Heat Input
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Tuesday, 29 September, 2009, 9:35 AM



I have done the PQR for LTCS by using 6010 & 7018-1 as per ASME SEC IX
some time i got 5KJ heat in put
What is the limitation for heat input and where it is mention?

Adi

From cricket scores to your friends. Try the Yahoo! India Homepage! --~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35507] WPS for Furnace PWHT

As per ASME B31.3, Clause 331.1.6 (b): Any required PWHT shall be carried out in accordance with the qualified WPS. For furnace PWHT inv...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...