Skip to main content

[MW:3378] Fw: NDE2009-PreConference Workshop on ULTRASONIC IMAGING - Invitation for nominations

Please arrange to post the details (attachment file) in the "Materials-Welding-google group".
Thank you,
Best Regards,
Vaidehi Ganesan.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----- Original Message -----
Sent: Thu, Sep 24, 09 7:12
Subject: NDE2009-PreConference Workshop on ULTRASONIC IMAGING - Invitation for nominations

Dear Colleagues

 

As a part of the NDE2009, the preconference workshop on ULTRASONIC IMAGING has been organised in Tiruchirapalli on 8-9 December 2009.

 

The brochure for this is attached with this email in pdf format.

 

As you can see, the best in the world are going to be at this workshop and this provides a unique opportunity to meet and interact with the leading experts in the world.

 

Hence, I request you to send in nominations for the workshop at the earliest. There is also an EARLY BIRD DISCOUNT for paid registration by 30th OCTOBER 2009 and a combo offer with the NDE2009 registration.

 

With best regards

 

 

Prof. Krishnan Balasubramaniam

Professor in Mechanical Engineering

Head of Centre for Nondestructive Evaluation

Professor-in-Charge of Office of International Relations

Indian Institute of Technology Madras

Chennai, INDIA 600 036

Tele: 91-44-2257-4662 or 5688

Fax: 91-44-2257-0545

Email: balas@iitm.ac.in

URL: http://www.cnde-iitm.net/balas

 

 



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.112/2389 - Release Date: 09/22/09 17:54:00

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Comments

Popular posts from this blog

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...

[MW:5202] RE: 5200] NDT after PWHT

------------------------------------- Interpretation:  I‑89‑14 Subject:         Section I (1986 Edition, 1987 Addenda), PW‑11,                  NDE Prior to PWHT Date Issued:     December 15, 1988 File:            BC88‑393   Question: Does PW‑11 require that NDE be performed on welds after they have been subjected to the postweld heat treatment required by PW‑39?   Reply: No, unless the conditions described in PW‑11.2.2 exist. ---------------------------------------------- Interpretation:  VIII-1-98-09 Subject:         Section VIII, Division 1 (1995 Edition, 1996 Addenda); NDE                 ...

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...