Thursday, August 27, 2009

[MW:3045] RE: 3036] TGX Welding

Its meant for root pass.
Use key hole technique in GTAW process
Rgds
Raj


-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of rajamani pugalendhi
Sent: Thursday, August 27, 2009 17:38
To: Materials & Welding
Subject: [MW:3036] TGX Welding


Dear All,

TGX Welding (root pass welding with out back purging) possible to use
the same filler wire to weld hot pass?
Also it is adviseble to use SMAW after root pass?

Please can any one suggest the pass sequence for TGX Welding.

Thanks in advance

Regards,
Pugal

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

[MW:35614] Re: SS FILLER

dear , pl check A number and Gas composition use for ss cant be sutibale same % for duplex., u need to qualified with aditional testing of f...