the construction code will show the types of test to be done. but most of tensile tests i have ever seen are mostly done on the longtidual section which is parallel to the rolling directions.
QA/QC ENG/ AMR SOLIMAN
PETROJET
Date: Thu, 8 Apr 2010 18:14:07 +0400
Subject: Re: [MW:4757] Testing of Materials
From: ibratech@gmail.com
To: materials-welding@googlegroups.com
Hi,
Is the construction as per AWS D1.1?. Or check your client spec. asked for this?.
Regards,
Ibrahim
On 8 April 2010 16:27, Rathinavel Arumugam <rathinavel1976@gmail.com> wrote:
Dear All !I have one job for marine classification. Material is AISI 4140 and dia id 355. Our Surveyor is insisting for Longitudinal Tensile Test and it cause huge material wastage. Is it approved to go with Transverse direction Test piece for Tensile Test and if so what is the acceptance critiria?Please Clarify!A.Rathinavel[ QA/QC MANAGER / CSWIP 3.1 ]
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Thanks & Regards
Muhammed Ibrahim PK
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now.
No comments:
Post a Comment