RE: [MW:4674] ER70S-3 for low temperature application

The Minimum Average Strengh for ER-70S-3 is -30°C at 27J. The Maximum is until it goes.

a hug,
Norberto de Souza Barbosa-Brazil
 

---

Subject: Re: [MW:4673] ER70S-3 for low temperature application
From: george.dilintas@gr.bureauveritas.com
Date: Fri, 2 Apr 2010 16:13:22 +0200
To: materials-welding@googlegroups.com

Then you will find your answer in USC-67.
If you do not have the code or you have interpretation problems let me know.

---

  From: Muhammed Ibrahim [ibratech@gmail.com]
  Sent: 02/04/2010 16:34 ZE4
  To: materials-welding@googlegroups.com
  Subject: Re: [MW:4670] ER70S-3 for low temperature application

Hi,

 

The code is ASME SEC. VIII Div.1.

 

Regards,

Ibrahim

 

On 2 April 2010 09:58, <george.dilintas@gr.bureauveritas.com> wrote:

Could you clarify what is the application code? Section I, section VIII-1?

---

  From: Muhammed Ibrahim [ibratech@gmail.com]
  Sent: 01/04/2010 18:40 ZE4

  To: materials-welding@googlegroups.com

  Subject: [MW:4661] ER70S-3 for low temperature application

Hi members,

 

Please provide a suggestion for the following query.

 

I have qualified a PQR for GTAW+SMAW with ER70S-3 & E7018-1. The PQR is impact tested at - 46 deg C at root(GTAW) and filling (SMAW) and passed (Min. 50J energy obtained).

 

As per ASME Sec.II part C, E7018-1 will support up to - 46 Deg C, but ER70S-3 will support up to - 20 Deg.C only.

 

Since I have proven the toughness through PQR, can I use this PQR for job with impact test requirement of - 46 Deg C, even ER70S-3 does not support for this temperature as per Sec.IIC?.

 
Thanks & Regards
Muhammed Ibrahim PK

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
Thanks & Regards
Muhammed Ibrahim PK

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

---

Veja todos os seus e-mails de diferentes contas com apenas um login. Veja como.