Re: [MW:28997] Welding of Materials A333 Gr.6 to A516

Beware of the minimum design temperature.

Per definition 333 is low temperature steel, while 516 it is not 

Στις Τετ, 9 Ιαν 2019, 18:09 ο χρήστης Andy <andrewgeraldmunro@gmail.com> έγραψε:

Good Afternoon, 

I'm looking for a bit of Guidance on Steel grades -

I have a welding procedure that covers me for ASTM A333 Gr.6 / ASTM A350 LF2 or Equivalent Grades. 

Can anybody advise if A516 is included in this equivalent grade or would i require a new procedure?

I feel that this "equivalent grade" Is open to interpretation. 

Thanks 

Andy

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.