Please be more specific. This is a general question but you can find what you are looking for by using the google search engine (google.com). Please search using these keywords: "ASNT acceptance criteria for RT". You will find lots of useful information and hopefully, you will find what you are looking for.
Regards
Ramin Kondori
Sr. QA/QC & Welding Engineer
-----------------------------------------------------------
PG-Dip. in Welding Engineering (IWE AT 0070)
BSc. in Civil Engineering (IUT)
BGAS Painting Inspector
ASNT Level I&II
On Mon, Jan 28, 2019 at 2:11 PM manish joshi <joshimanish10@gmail.com> wrote:
Dear SirPlease sent RT INTERPRETATION ACCEPTED CRITERIA as per ASNTRegardsManish Joshi----Hope you are clear with the visual.Thanks.
Regards,Mohamed Muneeb MahaboobCSWIP 3.2-89247/2IRCA-9001:2015 LAASNT-NDT-L2-RTFI-RT-UT-MT-PT.SAP#:70021650 APs:JAPID, QCS & QCI.''If you know any art by any means then SCULPT IT - no matter how cheap or useless it is - JUST SCULPT IT, you will never know when experts will be on demand''--Gents,I received a pipe ASTM A312 N08926.As per ASTM standard the Cr range required 24-26 and Nickel range 19-21.As pr ASME standard the Cr range required 19-21 and Nickel range 24-26.I have ASTM 2001 edition with me. Is there any updated edition available with changes?Now it is confusing. Please advice your opinion on this.Thanks & Regards
Muhammed Ibrahim PK
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment