Re: [MW:28975] SB-209 Grade 5183-PQR failure

Let me send the material certificate by tomorrow.

Regards,

Himan Nikdin

On Jan 25, 2019, at 08:44, Ramin Kondori <raminkondori@gmail.com> wrote:

What is the temper...?

Ramin  Kondori

Sr. QA/QC & Welding Engineer

-----------------------------------------------------------

PG-Dip. in Welding Engineering (IWE  AT  0070)

BSc. in Civil Engineering (IUT)

BGAS Painting Inspector

ASNT Level I&II

                        

On Thu, Jan 24, 2019 at 5:01 PM Himan Nikdin <himan.nikdin@outlook.com> wrote:

Dear Experts

A PQR sample has been welded per below procedure;

SB-209 Grade 5183

THK; 40 mm

Process; GTAW

Filer metal; ER5183

Shielding gas; Argon

Preheat Temp; 70°C/Interpass Temp; 100°C

but all four bend samples rejected due to facture, meanwhile the tensile result is less than acceptable criteria.

would you please advise me in regards to the reason for this failure.

Thanks Indeed

Himan Nikdin

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.