You can use MS cleats buttered with E 309 electrode for minimum of 3
layers. This helps to avoid contamination and carbon pick up on SS plate.
On MS plate, there will not be any issue.
C Sridhar
-----------------------------------------
On Friday, 28 September, 2018, 9:54:48 AM IST, George Dilintas <dilintas@gmail.com> wrote:
This message is eligible for Automatic Cleanup! (dilintas@gmail.com) The contamination will not affect the test piece. However in production contamination has to be avoided
Στις Πέμ, 27 Σεπ 2018, 13:55 ο χρήστης Gopalakrishnan G <gopal2408@gmail.com> έγραψε:
Dear experts--I want to do PQR for ss304L to is2062.my doubt is what material to be used for support to avoid distortion ? whether SS or MS ?.if I use MS for support any contamination will reflect in test piece?.kindly guide me.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment