Dear All,
I have to re-qualify the welders as per AWS D1.1 but I have some
quires. Please help me to resolve the same.
1) What should be the test piece thickness for re qualification ? Our
previous thickness was 25 mm. ( As AWS shows option of 10 mm thk test
plate which will qualify any production welding thickness )
2) Do I need to go for mechanical testing or only radiography is sufficient?
3) What will be the qualification range after successful qualification?
Regards,
Somnath Ashtakar
8668674172
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Post Comments (Atom)
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment