Re: [MW:28343] PQR usage (SA 516 Gr. 70 to SA 36)

Yes sir,

You can use the same.

On Wed, Sep 26, 2018, 3:30 PM williams p wilson <williamswilsonp@gmail.com> wrote:

Dear All,

I Have a PQR for SA 516 Gr.70 (N) Plate with Charpy V-notch Test -20 degree C

Can we use this as a supportive PQR for SA 36 Welding Procedure Specification.

(No Impact Test)

Welding Position, Process , Consumables will be same.

No PWHT.

Thank You & Regards

Williams

Mechanical Engineer

P Please consider the environment before printing this message

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.