assume that a welder has to deposit an overlay on a curved surface. If he is depositing that on the longitudinal direction, then the limitation on diameter is not applicable. If he is depositing the overlay in the circumferential one, then the limitation is applicable
Στις Τρί, 18 Σεπ 2018 στις 9:22 π.μ., ο/η ali <adeelscet@gmail.com> έγραψε:
--Dear Experts,I am beginner and reading asme ix for first timePlease explain the highlighted portion of qw 381 in pic below... please explain a little bit in detailThanks
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
Dr. Georgios Dilintas,
Dipl. Ing. In Aeronautic and Space Engineering
Ph.D in Mechanics of Solids - Computational Mechanics
A.I.S, A.N.I, IRCA Lead Auditor
Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment