Re: [MW:28309] PWHT required for HF service

what is the design & construction Code/Standard?

Στις Παρ, 3 Αυγ 2018 στις 7:56 μ.μ., ο/η Hrushikesh Sangamnerkar <hrushi612@gmail.com> έγραψε:

Dear expert,

Query:

 

Service: HF

MoC: SA 516 Gr 70

P No. - 1

Thickness - 40mm

Is PWHT specifically required for HF service?

Client has not mentioned anything about Lethal or Sour service.

Pl suggest.

Regards,

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.