Re: [MW:28352] Re: Reg:SS to MS support welding

Sir 

Thk u for ur reply.but how it affects the strength ?can u guide me plz.

On Thu, 27 Sep 2018, 6:35 pm sandeep kumar, <sandeepdhiman63@gmail.com> wrote:

Preferably use SS because of superior properties in terms of corrosion resistance & strength. I assume you are going to weld with 309L type consumables.

Otherwise use MS, weld with 309L, that what actually you are doing for the designed weld joint also.

Thanks & regards

Sandeep Kumar

On Thursday, September 27, 2018 at 1:55:59 PM UTC+3, Gopalakrishnan G wrote:

Dear experts

I want to do PQR for ss304L to is2062.my doubt is what material to be used for support to avoid distortion ? whether SS or MS ?.if I use MS for support any contamination will reflect in test piece?.kindly guide me.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.