NOW ASME SEC IX CODE 2017 is specifying set in set on
On Saturday, June 28, 2014 at 12:50:01 PM UTC+5:30, Rajesh S.Mhaske,Engineer Welding,CSWIP,ASNT,Pune, wrote:
-- On Saturday, June 28, 2014 at 12:50:01 PM UTC+5:30, Rajesh S.Mhaske,Engineer Welding,CSWIP,ASNT,Pune, wrote:
Dear sir nozzle welder qualification details required
Any reference document for below statement/ case study/Asme interpatation copy . I have to give it to third party inspector.
Now we are doing same but don't have document for reference
On Saturday, June 28, 2014 11:45:12 AM UTC+5:30, veera raghava kommisetti wrote:Set-on Type - Not qualified.Set-In Type - Qualified.On Fri, Jun 27, 2014 at 11:35 AM, rajesh s. mhaske ,Engineer Welding ,PUNE,INDIA <rajesh....@gmail.com> wrote:
--
Dear sir
Pipe dia : 323.*33 mm thk
Tube dia : 50.8 *6.35 mm thk
Groove design for above pipe to tube welding : set in (groove on header ) / set on (groove on tube )
Welding process : GTAW + FCAW
Qualification of welder: OD >73 mm and Thk - Max to be welded with process GTAW+FCAW
Question :
1) Can above qualified welder be deployed for welding of set in and set on joint.
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment