PREM S NAUTIYAL
CELL : 9769316004
From: MW <raghurambathula@gmail.com>
Sent: Tue, 15 Aug 2017 08:22:52 GMT+0530
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:26717] SA 516 Gr70 + SS 410S roll bonded clad plate
what is your clad thickness?
On Tuesday, 15 August 2017 06:51:37 UTC+4, PREM SHANKARDUTT NAUTIYAL wrote:
On Tuesday, 15 August 2017 06:51:37 UTC+4, PREM SHANKARDUTT NAUTIYAL wrote:
Dear Friends
A column is going to be fabricated as per ASME Sec VIII Div.1
The shell plate material is SA 516Gr.70 (14mm thk) + SS 410S (3.5 mm thk) Roll Bonded clad plate.
Client spec. mentions undiluted chemistry of SS 410S at height of 3mm for the roll bonded clad plate.
My doubt is whether plate manufacturer can achieve this stringent requirement ?
PREM S NAUTIYAL
CELL : 9769316004
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https:roups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment