Dear Experts
Pl let me know as per ASME, is it possible to use some others project PQR in other project as develop WPS, or we have to have first pWPS, WPS and PQR through our qualified welders…. Pl do share code/standards as possible.
Thanks
Raz Khan
From: 'vpv_333' via Materials & Welding [mailto:materials-welding@googlegroups.com]
Sent: Wednesday, August 23, 2017 11:09 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:26745] valve flow direction
There's no issues.
Best regards
P.VENKATESH
Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: Rameez khan RK <rk.rameezkhan21@gmail.com>
Date: 21/08/2017 23:02 (GMT+05:30)
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:26737] valve flow direction
Dear Expat,
I have a question regarding gate valve flow direction. if the direction change during fit up then what type of problem facing can any one tell me regarding this issue.
Thanking you
Rameez khan
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
Comments