Re: [MW:26736] QW-452.3 GROOVE-WELD DIAMETER LIMITS

Thanks, It is given in QW 403.16 for Performance qualification.

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Mon, Aug 21, 2017 at 2:03 PM, Kannayeram Gnanapandithan <kgpandithan@gmail.com> wrote:

tube dia is less than 73 , not qualified

vijai, in sec 9, where it is given for set in /set on

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Mon, Aug 21, 2017 at 12:42 PM, Vishwas Keskar Welding Manager Pune India <vvkeskar123@gmail.com> wrote:

This message is eligible for Automatic Cleanup! (vvkeskar123@gmail.com) Add cleanup rule | More info

NOW ASME SEC IX CODE 2017 is specifying set in set on

On Saturday, June 28, 2014 at 12:50:01 PM UTC+5:30, Rajesh S.Mhaske,Engineer Welding,CSWIP,ASNT,Pune, wrote:

   Dear sir  nozzle welder qualification details required 
               Any reference document for below statement/ case study/Asme interpatation copy . I have to give it to third party inspector.
Now we are doing same but don't have document for reference

On Saturday, June 28, 2014 11:45:12 AM UTC+5:30, veera raghava kommisetti wrote:

Set-on Type - Not qualified.

Set-In Type - Qualified.

On Fri, Jun 27, 2014 at 11:35 AM, rajesh s. mhaske ,Engineer Welding ,PUNE,INDIA <rajesh....@gmail.com> wrote:

Dear sir
           Pipe dia : 323.*33 mm thk
           Tube dia : 50.8 *6.35 mm thk
           Groove design for  above pipe to tube welding  : set in (groove on header )  / set on (groove on tube  )
           Welding process : GTAW + FCAW

           Qualification of welder: OD >73 mm and Thk - Max to be welded with process GTAW+FCAW
          
Question :
            1) Can above qualified welder be deployed for welding of set in and set on joint.
           

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.