Monday, August 21, 2017

[MW:26733] Re: Welding of Alloy800 # SA 213 T11

It is correct filler wire - ERNICR3  
A heat exchanger is being fabricated as per ASME Sec VIII Div.1.

Service Temp is @ 480 degree C.

Tubes material is SA 213 T11 - 1Cr,0.5Mo.

Tube sheet material is SB 409 (Alloy 800)- 33Ni, 42Fe,21Cr UNS No. N08800.

We have selected TIG filler as ER NiCr-3 for the tube to tubesheet joint.

Is the selection of filler metal satisfactory or any better alternative ?

Regards

Prem Nautiyal
cell: 9769316004


PREM S NAUTIYAL
CELL : 9769316004

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...