Wednesday, August 16, 2017

[MW:26719] Polisher softening Vessel Flange Corrosion

Dear Friends,

we are facing the problem, one of our polisher softening vessel 24'' nozzle flange has corroded refer attached photos.

This Vessel was internally coated with Belzona 1391S and Materials of the flange ASTM A105 /N ('10ED)+NACE MR-0175.

Also, the gasket that we used was of SS316 L Inner. SS316L Winding, FG, SS Outer, ASME B16.20 #150.


Kindly advice as to what might have been the cause of the corrosion and also advise how to rectify and prevent any such occurrence in the future.
 
-- 

Thanks & Regards,
J.PUGAZHENTHI


--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35506] WPS for Furnace PWHT

Dear Sir, I am not clear about the question. Is the question is "The welding is done without following a WPS having  PWHT and actually ...