Bolt can be accepted as it meets minimum specified elongation.
Prem Nautiyal
Sent from Samsung Mobile
-------- Original message --------
From: Karthikeyan Shanmugananthan
Date:23/01/2016 6:01 PM (GMT+05:30)
To: Materials & Welding
Subject: [MW:24166] RE: 24163] Material properties
Thanks for ur response,recently myself reviewed a test reports of bolts as per SA-193, as per standard elongation % should be min 16% but test certificate shows 20% whether can I accept material or not. All bolts are pertaining to pressure vessel application.
Also suggest, maximum limit of elongation %
Regards
S.karthikeyan
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d1a70189-6424-4c15-a4df-b323db969a55%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment