Re: [MW:24072] PQR position conflicts

Dear,

PQR is qualified but welder is not qualified for 6G position.

regards

peter soloman

On Mon, Dec 7, 2015 at 4:00 PM, Narender Reddy <malgireddy.2010@gmail.com> wrote:

Dear experts

As per sec IX

I have an PQR which qualified on 3G(Plate) so

Q.1) Can i use that pqr for to weld 3Nps pipe 6g positions welding.

or is there any conflict between plate and pipe qualification.If there experts can explain why?

Bets regards

reddy.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/eefd149c-2943-4be7-901c-68dc59be172c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMvP5syom%3DgwBQ800tM9RvOaBR9zjrVtLwqohrnd7K9gZxn_CA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.