Re: [MW:24089] lap time between root & hot pass

You won't see much of a difference between the 10 and the 20 minutes time lapse just the interpass temperature difference, the point is you need to strictly follow what you qualified as welding procedure.

Regards

On Monday, January 11, 2016, 'ahmed boh' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Hi all,

hot pass was performed after 20 mn of hot pass.

the client recommend to cut out this weld because the maximum of lap time between root and hot is 10 mn.

I tried ti explain him it is no problem is no big difference than 10 mn. pls help me if I did right??

Ahmed R

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f40bf144-0bd7-48a1-aad3-c580def4fa30%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEGUTtWrUrvnYaNZXQ5BGcjWsp%2BsM2toOvv5uiY-M7Tv8Wf38g%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.