Re: [MW:24074] PQR position conflicts

Hi!

As per ASME code

I) If PQR is qualified in 3G having Impact test requirement  for equipment  in such case you can qualify welder for any position based on this relevant PQR and WPS as per requirement

(For Impact test requirement  Welding position is essential for PQRi.e. 3G)

ii) If PQR is qualified for Non Impact test requirement(Even in 1G position ) in such case you require to qualify welder in any position as per requirement

Regards

Hegde P.B.

On Saturday, 9 January 2016 4:31 PM, Peter Soloman <petervsoloman@gmail.com> wrote:

Dear,

PQR is qualified but welder is not qualified for 6G position.

regards

peter soloman

On Mon, Dec 7, 2015 at 4:00 PM, Narender Reddy <malgireddy.2010@gmail.com> wrote:

Dear experts

As per sec IX

I have an PQR which qualified on 3G(Plate) so

Q.1) Can i use that pqr for to weld 3Nps pipe 6g positions welding.

or is there any conflict between plate and pipe qualification.If there experts can explain why?

Bets regards

reddy.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/eefd149c-2943-4be7-901c-68dc59be172c%40googlegroups.com?utm_medium=email&utm_source=footer.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMvP5syom%3DgwBQ800tM9RvOaBR9zjrVtLwqohrnd7K9gZxn_CA%40mail.gmail.com?utm_medium=email&utm_source=footer.
For more options, visit https://groups.google.com/d/optout.