[MW:24128] RE: 24126] Qualified thickness for welder

Maximum thickness he can weld as per 452.1b
Pipe OD from 73dia to above 24inch he can weld with limitations as per 461.9

---

From: anamulqc@gmail.com
Sent: ‎19-‎01-‎2016 07:55
To: Materials & Welding
Subject: [MW:24126] Qualified thickness for welder

Dear Sir,

 We conducted welder qualification at Karbala Oil Refinery Project as per ASME-IX 2013 Edition. 

 WPS details as follow 

1. WPS qualified base metal- P1 to P1 Gruop all

2. WPS mentioned base metal thickness range- 5 to 26 mm

3. Process FCAW

WQT details

1. Joint design Single V butt joint with back weld(Root side back grind then weld)

2. Base metal SA283-C

3. Thickness 16.0 mm

4. Sequence of welding- Root pass>Hot Pass>Filling>Capping>Back grind & Back weld

5. Test position 2G & 3G 

My client inspector say welder will qualified only for 2T  & Pipe Diameter will qualify over 24" I want to clarify is he correct? For thickness qualified he mention about QW-404.30 

However I will appreciate to you for clarify my problem.

Regards

Anamul

QA/QC Engineer

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b86d11c7-1ff9-4ee6-b63e-040e6aafcdbe%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.