Re: [MW:24072] Re: Type of paint use on fit up joints before welding

Dear .

I would like to inform you selection of paint are based on type of environment use like corrosive & its applicability use.

There is wide range of paints are available with minimum expected life.

Regards

Dinesh

On Friday, January 8, 2016, Ki Rok, NAM <kirok.nam@gmail.com> wrote:

Apology for late reply.

Hope that below comments can support for solution of curiosity

Our Company has been coated with an aluminum-flake weldable primer ("Deoxaluminite" or "Bloxide" or other brand) for prevent the anti rust of Weld Bevel Ends.

2010년 11월 11일 목요일 오후 3시 24분 23초 UTC+9, Shamesh Lotlikar 님의 말:

Dear All, can any one give information on type of PAINT which we can use on the fit up joints before welding so that it will prevent the rusting of the surface of fit up joints. Kindly give us the name and type and brand of the paint which will be faster to get the same Shamesh Lotlikar

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/15d4ea6f-4b48-4ab9-9c86-4811d748bd57%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

DINESH VITTHAL SOMWANSHI

BACHELOR IN MECHANICAL ENGINEER

AUTHORIZED WELDING / NDT / PAINTING INSPECTION PERSONNEL,

AWS - CWI , CSWIP 3.1

BGAS  Gr 2 / 3

NDT II -UT , RT , MT , PT, VT

00919881344135

असो द्यावी दया तुमच्या लागतसे पाया.

Pray for others, sometime, You might never need to pray for yourself again.....

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAELgRrUbMzfy2H3avf21hSSYOMX%2Baj91z0iEgtM2_JHFcmG0Hg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.